Description
Tillett B6-40 Carbon/ GRP Car Seat (Bottom Mounted) – Edges off
This seat is the narrowest version of the B6 seat suited to many kit and track day cars. This is the seat that fits the Caterham S3 chassis. Its driving angle is based on our popular Caterham R500 seat but it has some important differences. The headrest has been moved back to prevent the drivers head from being pushed forward when using a crash helmet and the shoulder belt holes have been designed to allow the use of a Hans device.
The hip holes have also been enlarged to help easier access for wider lap belts. The composite shell is made so that the outer edge can be either removed for narrow 40 cm tubs or left on to create a continuous rolled edge around the whole perimeter of the seat. It is then 40cm wide. The B6 is available in Carbon/GRP or Black GRP and is supplied complete with a Dinamica ® suede covered headrest pad as standard. It can also be supplied with matching back and cushion panels at extra cost. The weight of the carbon/GRP B6 and the GRP only seat is 4.5 kg.
The mounting points for the B6 are under the seat so that the TR1 Tillett Adjustment Runners can be bolted directly to the underneath (Please note that the runners must be spaced 1 cm from the underside of the seat to give clearance for the handle to operate). Mounting of the seat is also possible straight to the floor using a piece of 25 mm box section or runner system and Nylon spacers can be supplied to tip the seat at different angles
Reviews
There are no reviews yet.